We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
A research paper published in ACS Applied Materials & Interfaces detailed the development of a corn biomass-based carbon framework and a green cross-linking binder for a silicon-based electrode in lithium-ion batteries. The goal was to minimize the decline in specific capacity because of volumetric expansion and contraction after charge/discharge cycles.
Study: Structural and Interfacial Characterization of a Sustainable Si/Hard Carbon Composite Anode for Lithium-Ion Batteries. Image Credit: Matauw/Shutterstock.com
The growing use of electric vehicles, portable electronic gadgets, and energy storing platforms has resulted in an ever-increasing need for raw materials used in manufacturing lithium-ion batteries (LIBs).
Excellent cyclic life, ubiquitous availability and cheap cost have made graphite the currently preferred material for making anodes of LIBs. However, graphite anodes are plagued with drawbacks of poor specific capacity, energy density, and safety concerns associated with the deposition of lithium (Li).
Finding suitable alternatives to graphite for anode materials of LIBs is currently receiving a lot of attention. The goal is to develop inexpensive anode materials that have improved safety, a higher specific capacity and energy density, and extended cyclic life.
Extracting value from waste materials via recycled uses is critical for lowering the ecological detriment caused by their direct disposal.
Alloy-based anodes are renowned for their improved safety and excellent specific capacities.
High specific capacities at ambient temperatures, low operating potential against Li+/Li, and availability make silicon (Si)-based alloy anodes favorable materials for usage in state-of-the-art LIBs.
Despite its superior electrochemical behavior, silicon undergoes large volumetric fluctuations during charging/discharging cycles, resulting in interface instability, pulverization of electrodes, breakdown of electric contact, and rapid decline in performance.
To address the drawbacks of silicon-based alloy anodes, employing carbon-based materials as a buffering matrix for the volumetric expansion of alloy anodes is an attractive approach.
Using non-graphitizing carbon in composite anodes facilitates the combination of desired chemical and physical properties of carbon-based materials with large volumetric and gravimetric energy densities of alloy materials.
Non-graphitizing carbon is quite appealing as it can be produced from biomass waste. Subject to adequate optimization, the production of non-graphitizing carbon can have a smaller overall impact concerning manufacturing costs and energy efficiency compared to more complex carbon-based materials like graphene.
Green binders that include large concentrations of functional units like hydroxyl (-OH), carboxyl (-COOH), or amino groups (-NH2) may help in boosting the effectiveness as well as the stability of alloy-based materials.
These advantageous characteristics can be attributed to the binder's superior elasticity and adhering qualities and better interactions between the active component and binder.
Binder selection is critical for alloy-based materials because of the possibilities of utilizing intra- and intermolecular polar forces.
In this study, the team investigated the stability and effectiveness of a composite anode made of silicon and biomass-based non-graphitizing carbon, supported by a green cross-linking binder.
The galvanostatic cycle demonstrated relatively good performance equivalent to the performance shown by the same material using industrial graphite as the buffer matrix, but with greater stability during extended cycles and no solid electrolyte interphase breakup.
The cross-linking green binder was shown to be more successful than the previously reported binders in fostering increased structural stability. The composite anode demonstrated excellent capacity retention and minimal polarization in the rate capability test, even at elevated current rates.
The findings illustrated that the non-graphitic carbon framework is useful for buffering volumetric variations during cycling. Additionally, stable solid electrolyte interphase was created after the first cycle, making a minimal contribution to the overall impedance and requiring no further electrolyte breakdown in proceeding cycles. The team also established the reversibility of the process.
The composite anode demonstrated remarkable properties despite the high silicon content. Furthermore, the non-graphitic carbon was procured using biomass waste without any preliminary treatment before pyrolysis. This approach ultimately proved to be a more sustainable method of transforming waste biomass into useful resources.
Sbrascini, L., Staffolani, A., Bottoni, L., Darjazi, H., Minnetti, L., Minicucci, M., & Nobili, F. (2022). Structural and Interfacial Characterization of a Sustainable Si/Hard Carbon Composite Anode for Lithium-Ion Batteries. ACS Applied Materials & Interfaces. Available at: https://pubs.acs.org/doi/10.1021/acsami.2c07888
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Shaheer is a graduate of Aerospace Engineering from the Institute of Space Technology, Islamabad. He has carried out research on a wide range of subjects including Aerospace Instruments and Sensors, Computational Dynamics, Aerospace Structures and Materials, Optimization Techniques, Robotics, and Clean Energy. He has been working as a freelance consultant in Aerospace Engineering for the past year. Technical Writing has always been a strong suit of Shaheer's. He has excelled at whatever he has attempted, from winning accolades on the international stage in match competitions to winning local writing competitions. Shaheer loves cars. From following Formula 1 and reading up on automotive journalism to racing in go-karts himself, his life revolves around cars. He is passionate about his sports and makes sure to always spare time for them. Squash, football, cricket, tennis, and racing are the hobbies he loves to spend his time in.
Please use one of the following formats to cite this article in your essay, paper or report:
Rehan, Shaheer. (2022, July 21). Nanocomposite Anode for Lithium-Ion Batteries Made Using Corn. AZoNano. Retrieved on July 22, 2022 from https://www.azonano.com/news.aspx?newsID=39441.
Rehan, Shaheer. "Nanocomposite Anode for Lithium-Ion Batteries Made Using Corn". AZoNano. 22 July 2022. <https://www.azonano.com/news.aspx?newsID=39441>.
Rehan, Shaheer. "Nanocomposite Anode for Lithium-Ion Batteries Made Using Corn". AZoNano. https://www.azonano.com/news.aspx?newsID=39441. (accessed July 22, 2022).
Rehan, Shaheer. 2022. Nanocomposite Anode for Lithium-Ion Batteries Made Using Corn. AZoNano, viewed 22 July 2022, https://www.azonano.com/news.aspx?newsID=39441.
Do you have a review, update or anything you would like to add to this news story?
We speak with researchers behind the latest advancement in graphene hBN research that could boost the development of next-generation electronic and quantum devices.
AZoNano speaks with Dr. Laurene Tetard from the University of Central Florida about her upcoming research into the development of nanotechnology that can detect animal-borne diseases. The hope is that such technology can be used to help rapidly control infected mosquito populations to protect public
AZoNano speaks with Dr. Amir Sheikhi from Pennsylvania State University about his research into creating a new group of nanomaterials designed to capture chemotherapy drugs before they impact healthy tissue, amending a fault traditionally associated with conventional nanoparticles.
The Filmetrics R54 advanced sheet resistance mapping tool for semiconductor and compound semiconductor wafers.
This product profile describes the latest nano-particle analyzer "thesis particle size analyzer" and its key features.
The Filmetrics F40 turns your benchtop microscope into an instrument for measuring thickness and refractive index.
AZoNano.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022