Click here to sign in with or
by National Research Council of Science & Technology
Fuel cell electric vehicles (FCEVs) are an eco-friendly means of transportation that will replace internal combustion locomotives. FCEVs offer several advantages such as short charging time and long mileage. However, the excessive cost of platinum used as a fuel cell catalyst leads to limited supply of FCEVs. There has been extensive research on non-precious metal catalysts such as iron and cobalt to replace platinum; however, it is still challenging to find substitutes for platinum due to low performance and low stability of non-precious metal catalysts.
A research team led by Dr. Sung Jong Yoo of the Hydrogen Fuel Cell Research Center at Korea Institute of Science and Technology (KIST) conducted joint research with professor Jinsoo Kim of Kyung Hee University and professor Hyung-Kyu Lim of Kangwon National University; they announced that they have developed a single atomic cobalt-based catalyst with approximately 40% improved performance and stability compared to contemporary cobalt nanoparticle catalysts. Their research is published in Applied Catalysis B: Environmental.
Conventional catalysts are typically synthesized via pyrolysis, wherein transition metal precursors and carbon are mixed at 700–1000℃. However, due to metal aggregation and a low specific surface area, the catalysts obtained through this process had a limited activity. Accordingly, researchers have focused on synthesizing single-atomic catalysts; however, previously reported single-atomic catalysts can only be produced in small quantities because the chemical substances and synthesis methods used varied depending on the type of the synthesized catalyst . Therefore, research has focused on performance improvement of the catalyst rather than the manufacturing process.
To address this problem, the spray pyrolysis method was implemented using an industrial humidifier. Droplet-shaped particles were obtained by rapidly heat-treating the droplets obtained from a humidifier. This can enable mass production through a continuous process, and any metals can be easily produced into particles. The materials used for the synthesis of metal particles should be water-soluble because the particles are made through an industrial humidifier.
It was confirmed that the cobalt-based single-atomic catalysts developed through this process exhibit excellent stability as well as fuel cell performance and are 40% superior compared to conventional cobalt catalysts. Cobalt-based catalysts also cause side reactions in fuel cells; however, computational science has shown that catalysts manufactured via spray pyrolysis lead to forward reactions in fuel cells.
Dr. Yoo clarified, "Through this research, a process that can enable considerable improvement in the mass production of cobalt-based single-atomic catalysts has been developed, and the operating mechanism of cobalt-based catalysts has been elucidated via close analyses and computational science. These results are expected to serve as indicators for future research on cobalt catalysts." They also added, "We plan to expand the scope of future research to explore not only catalysts for fuel cells, but also environmental catalysts, water electrolysis, and battery fields." Explore further Large-scale synthesis methods for single-atom catalysts for alkaline fuel cells More information: Kyungmin Im et al, Design of Co-NC as efficient electrocatalyst: The unique structure and active site for remarkable durability of proton exchange membrane fuel cells, Applied Catalysis B: Environmental (2022). DOI: 10.1016/j.apcatb.2022.121220 Provided by National Research Council of Science & Technology Citation: Development of high-durability single-atomic catalyst using industrial humidifier (2022, May 13) retrieved 13 May 2022 from https://phys.org/news/2022-05-high-durability-single-atomic-catalyst-industrial-humidifier.html This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no part may be reproduced without the written permission. The content is provided for information purposes only.
More from Physics Forums | Science Articles, Homework Help, Discussion
Use this form if you have come across a typo, inaccuracy or would like to send an edit request for the content on this page. For general inquiries, please use our contact form. For general feedback, use the public comments section below (please adhere to guidelines).
Please select the most appropriate category to facilitate processing of your request
Thank you for taking time to provide your feedback to the editors.
Your feedback is important to us. However, we do not guarantee individual replies due to the high volume of messages.
Your email address is used only to let the recipient know who sent the email. Neither your address nor the recipient's address will be used for any other purpose. The information you enter will appear in your e-mail message and is not retained by Phys.org in any form.
Get weekly and/or daily updates delivered to your inbox. You can unsubscribe at any time and we'll never share your details to third parties.
Medical research advances and health news
The latest engineering, electronics and technology advances
The most comprehensive sci-tech news coverage on the web
This site uses cookies to assist with navigation, analyse your use of our services, collect data for ads personalisation and provide content from third parties. By using our site, you acknowledge that you have read and understand our Privacy Policy and Terms of Use.